| |
| Model |
Description |
| MsSR-3030 |
Ms
guided wave inspection system
w/instruction manual, Digital communication,
PC card and cable for reading MsS instrument setting with
standard
acc. & Inspection License
|
|
¡¡ |
| Model |
Description |
| MsS-3000 |
Ribbon
coil adaptor (for pipe, rod, cable, etc.) |
| £ª3064 |
64
kHz torsional mode dual adaptor (20 pins) |
| £ª3128 |
128
kHz torsional mode dual adaptor (20 pins) |
| £ª3256 |
256
kHz torsional mode dual adaptor (20 pins) |
| £ª3090 |
single-coil
adaptor for operating arbitrary frequency
(used for both torsional and
longitudinal mode), 20 pins |
| 3099 |
Other
Size and Frequency |
|
¡¡ |
| Model |
Description
[Length (inch / cm)] |
|
MKSR-2100H |
1.0 inch
wide Single
Ribbon Coils (Torsional Mode) 20 pins |
|
2102HA |
2.38 inch
OD pipe (7.93" / 20 cm) |
|
2102HB |
2.88 inch
OD pipe (9.06" / 24 cm) |
|
2103H |
3.50 inch
OD pipe (11.46" / 29 cm) |
| 2104HA |
4.00 inch
OD pipe (13.03" / 33 cm) |
| 2104HB |
4.50 inch
OD pipe (15.75" / 37 cm) |
| 2105H |
5.56
inch OD pipe (17.94" / 46 cm) |
| 2106H |
6.63 inch
OD pipe (22.44" / 54 cm) |
| 2108H |
8.83 inch
OD pipe (28.74" / 70 cm) |
| 2110H |
10.75
inch OD pipe (35.37" / 87 cm) |
| 2112H |
12.75
inch OD pipe (41.73" / 103 cm) |
| 2114H |
14.0
inch OD pipe (45.67" / 114 cm) |
| 2116H |
16.0
inch OD pipe (51.97" / 130 cm) |
| 2118H |
18.0
inch OD pipe (58.27" / 146 cm) |
| 2120H |
20.0
inch OD pipe (64.57" / 162 cm) |
| 2122H |
22.0
inch OD pipe (70.87" / 178 cm) |
| 2124H |
24.0
inch OD pipe (77.17" / 194 cm) |
| 2126H |
26.0
inch OD pipe (83.47" / 210 cm) |
| 2128H |
28.0
inch OD pipe (89.76" / 226 cm) |
| 2130H |
30.0
inch OD pipe (96.06" / 242 cm) |
| 2132H |
32.0
inch OD pipe (102.36" / 258 cm) |
| 2134H |
34.0
inch OD pipe (108.66" / 274 cm) |
| 2136H |
36.0
inch OD pipe (114.96" / 290 cm) |
| 2140H |
40.0
inch OD pipe (127.23" / 325 cm) |
|
2142H |
42.0
inch OD pipe (133.51" / 336 cm) |
| £ª2145H |
A set
of ribbon coils (34 ea)
(2102HA, 2102HB, 2103H, 2104HA, 2104HB, 2105H, 2106H, 2108H,
2110H, 2112H, 2114H, 2116H, 2118H, 2120H, 2124H, 2130H and 2140H) x 2 |
|
|
| Model |
Description |
| MKSR-2200 |
MsS
probe for Plate Inspection (Bar type) |
| £ª2210 |
1-inch-long,
plate- probe |
| £ª2260 |
8-inch-long,
64-kHz SH-mode dual plate- probe |
| 2262 |
12-inch-long,
64-kHz SH-mode dual plate- probe |
| 2280 |
8-inch-long,
128-kHz SH-mode dual plate- probe |
| £ª2290 |
8-inch-long,
8~64kHz
(for
operation at arbitrary frequency), a pair
|
| 2291 |
12-inch-long,
8~64kHz
(for
operation at arbitrary frequency), a pair
|
| 2299 |
Other
Size and Frequency |
|
|
| Model |
Description |
| MKSR-2300 |
Ring
Probe |
| 2305 |
0.5" ID, 16~128 kHz variable Ring Probe with Adaptor |
| 2310 |
1.0" ID, 16~128 kHz variable Ring Probe with Adaptor |
| 2315 |
1.5"
ID, 16~128 kHz variable Ring Probe with Adaptor |
| 2320 |
2.0" ID,
16~128 kHz variable Ring Probe with Adaptor |
| 2325 |
2.5" ID,
16~128 kHz variable Ring Probe with Adaptor |
| 2350 |
Other size Ring probes |
|
¡¡ |
| Model |
Description |
| MKSR-2360 |
HX
Probe |
| HX-19 |
MsS
Probe for Heat Exchanger Tube
128
kHz, Torsional, 19 mm ID
|
| HX-23 |
MsS
Probe for Heat Exchanger Tube
128
kHz, Torsional, 23 mm ID
|
|
|
¡¡
¡¡ |
| Model |
Description |
| MKNF-2400 |
Iron Cobalt & Nickel Foil |
| 2415 |
Iron Cobalt Roll of 0.5" ¡¿
0.006", made in USA
(12.70 mm x 0.15 mm
thick, 1 kg)
|
| 2416 |
Iron Cobalt Roll of 1.0" ¡¿
0.006", made in USA
(25.40 mm x 0.15 mm
thick, 1 kg)
|
| 2417 |
Iron Cobalt Roll of 0.75 " ¡¿
0.006", made in USA
(18.75 mm x 0.15 mm
thick, 1 kg)
|
| 2495 |
Nickel Roll of 1.0" ¡¿
0.006"t, made in Japan
(25.40 mm x 0.15 mm
thick, 3 kg)
|
| 2496 |
Nickel Roll of 5/8" ¡¿
0.006", made in Japan
(25.40 mm x 0.15 mm
thick, 3 kg)
|
| £ª2498 |
Nickel Roll of 3/4" x 0.01t, made in USA
(18.75 mm x 0.25mm thick, 3 kg)
|
| 2499 |
Other Sizes |
|
|
| Model |
Description |
| MKPM-2500 |
Material Conditioner |
| 2502 |
Big Conditioner
1 x Neodymium iron boron (NdFeB) bias-magnet circuit
# Recommended number of magnet needed
for a pipe by
Longitudinal method is3
ea for 4-inch-OD,
4 ea for 6-inch-OD, 5 ea for 8-inch-OD pipe. |
|
£ª2530 |
Strip Conditioner with
wheels
(1.6 x 0.8 x 0.8" = 40 x 20 x 20 mm size magnet inside) |
| 2536 |
Handy Conditioner for Anchor Rod Inspection |
| 2538 |
Long Conditioner for Multi Strips(150mm Conditioning Area) |
| 2552 |
AL lever for magnet separating |
| 2553 |
Shunting
bar |
| 2566 |
Adaptor for 2536 |
| 2599 |
Other
size magnets |
|
¡¡ |
| Model |
Description |
| MKJB-2600 |
Junction Box |
| 2601 |
Junction
Box |
| 2602 |
50 ft (15 m) long interconnection cable
between MsSR-2020AD and junction box with connectors |
| 2603 |
100 ft (30 m) long interconnection cable
between MsSR-2020AD and junction box with
connectors |
|
2605 |
25
ft (7.5 m) long interconnection cable
between MsSR-2020AD and junction box |
|
2609 |
Cable Checker |
|
2616 |
5 m
DC cable with Canon jack |
|
2617 |
NI
communication cable |
| £ª2624 |
Eight 6-ft cables between junction box and MsS probe(4 pairs) |
|
| |
| £ª
Fast delivery |
| |
